About this article: This article is reviewed against the cited sources. This is source research, not lab validation. Check the stated versions and your own requirements before making changes.
Error 8524 (0x214c) is a DNS failure reported by Active Directory. The destination domain controller (DC) could not turn the source DC into an IP address, using either the CNAME record built from the source's GUID or its host (A or AAAA) record. There are two groups of causes: the source DC is gone but still listed in Active Directory, or a DNS record or DNS setting somewhere on the path is wrong.
Start by finding which DC the error names and whether it still exists. If it does, test its CNAME with ping and nslookup from the destination DC. The first failing step shows which DNS layer to fix.
What the error means
Microsoft's page says: "It's a catch-all error for all possible DNS failures affecting Active Directory on post Windows Server 2003 SP1 domain controllers." Replication addresses the source by a name of the form <object GUID of the source's NTDS Settings object>._msdcs.<forest root domain>. In summary, "the 8524 replication status is logged when a destination DC can't resolve the source DC by its CNAME and Host 'A' or Host 'AAAA' records using DNS."
Two events accompany it. Event 2087 from Microsoft-Windows-ActiveDirectory_DomainService says that Active Directory Domain Services "couldn't resolve the following DNS host name of the source domain controller to an IP address." Event 2088 is logged "when a source domain controller is successfully resolved by its NetBIOS name but such name resolution fallback only occurs when DNS name resolution fails." Microsoft says that 8524 together with 2087 or 2088 "all indicate that DNS name resolution is failing Active Directory." Other events that cite 8524 include 2023, 1655, 1308, 1865, 1925 and 1926.
Because each promotion of a DC with the same name can create a new NTDS Settings object with a different GUID, and so a different CNAME, a DC that was rebuilt can leave an old object behind. Microsoft says its support staff "regularly" find stale metadata for DCs that no longer exist, or left over from earlier promotions of a DC with the same name.
Likely causes
| Cause | What you see | How to confirm |
|---|---|---|
| Source DC is offline or removed, but its NTDS Settings object remains | 8524 names a DC that no longer exists | The GUID in the destination's view differs from the source's own, or the DC does not exist |
| Source DC did not register its CNAME or host records | nslookup for the CNAME returns nothing from the source's DNS servers |
Query each DNS server the source DC uses |
| Source or destination DC points at the wrong DNS servers | Servers do not host, forward or delegate _msdcs.<forest root> or the domain zone |
ipconfig /all then nslookup -type=soa against each server |
| Records have not reached the DNS server the destination uses | Present on one server, absent on another | Replication latency or failure, or a zone transfer failure |
| Invalid forwarders or delegations | Cross-domain names fail | Check the parent zone's delegation and the forwarder addresses |
| ISP DNS used by a DC | Dynamic registration refused | Microsoft notes that ISP DNS servers may not accept dynamic updates, so records may need registering by hand |
Prove the cause before changing anything
All of the following are read-only. Work from the destination DC that logs the error.
- Read the error's detail:
repadmin /showrepl. Note the source DC's name and the line "Last attempt @ ... failed, result 8524 (0x214c)." - Get the GUID the destination holds for that source. In
repadmin /showrepl <destination DC FQDN>, the "DSA object GUID" under the source DC is the GUID from the destination's copy of Active Directory. - Get the GUID the source holds for itself. Run
repadmin /showrepl <source DC FQDN>and read the "DSA Object GUID" in the header. If the source DC is gone, this step cannot be done: go to the stale-metadata fix below. - Compare. Microsoft says: "If the object GUIDS are the same, then the source DC and destination DC know about the same instantiation (the same promotion) of the source DC. If they're different, then figure which one was created later. The NTDS setting object with the earlier create date is likely stale and should be removed."
- From the destination DC, ping the source's CNAME:
ping <GUID>._msdcs.<forest root DNS domain>. If ping resolves, retry the failing operation. If it fails, continue below.
Then run Microsoft's DNS health test on both DCs: DCDIAG /TEST:DNS /V /S:<DC NAME> /F:<File name.txt>. Microsoft says: "DCDIAG /TEST:DNS does seven different tests to quickly vet the DNS health of a domain controller. This test isn't run as part of the default execution of DCDIAG." Read the summary table at the end of the output and reconcile any warning or failure. For all DCs in the forest, the page gives DCDIAG /TEST:DNS /V /E /F:<File name.txt>.
If dcdiag does not name the cause, query DNS directly. First list the DNS servers each DC uses:
ipconfig /all
Then ask each of those servers whether it can answer for the zones. Microsoft's pattern is:
nslookup -type=soa <Active Directory DNS domain> <DNS server IP>
nslookup -type=soa _msdcs.<forest root DNS domain> <DNS server IP>
nslookup -type=cname <GUID>._msdcs.<forest root DNS domain> <DNS server IP>
nslookup -type=A+AAAA <source DC FQDN> <DNS server IP>
Run them from the source DC against its own servers, then from the destination DC against its servers. Microsoft notes that CNAME records "are always registered in the _msdcs.<forest root zone>, even for DC in non-root domains," and that the SOA query for _msdcs fails on a server where it is a non-delegated subdomain of the forest root zone.
Microsoft does not print a sample of a good or bad result for these lookups in the page. In words: a good result returns an answer from every server queried, and a bad result is a non-existent domain or no answer from at least one.
Fix
Source DC no longer exists (stale metadata). Remove its NTDS Settings object from the destination DC's copy of Active Directory. In Active Directory Sites and Services (DSSITE.MSC), use "Change Domain Controller..." to point at the destination DC, find the source under Sites, the site name, Servers, the server name, and delete its NTDS Settings object. Microsoft also documents the command-line route, NTDSUTIL metadata cleanup.
Disruptive step: deleting an NTDS Settings object removes the DC from replication topology. If that DC is actually still needed, it has to be repaired or promoted again; there is no undo. Confirm that the DC is gone, not just unreachable, and keep the GUID from step 2 on file. If it is only offline, Microsoft says to make it operational instead.
Source did not register its records. Restart the Netlogon service on the source, which re-registers the CNAME: net stop netlogon & net start netlogon. For host records, ipconfig /registerdns.
Risk: Netlogon is the DC's logon service, so plan for that DC to be unavailable for logons while the service is stopped. Do it in a quiet period, and do not run it on every DC at once. To back out, start the service again. Microsoft says Netlogon registers CNAMEs at startup and at recurring intervals, and notes that timing during startup can delay registration.
Wrong DNS client settings. On both DCs, point the DNS client only at online servers that host, forward or delegate _msdcs.<forest root domain>, the Active Directory domain zone and the computer's primary DNS suffix zone. Microsoft says pointing a DC at an ISP's DNS server is invalid unless that ISP hosts, forwards or delegates your Active Directory DNS under contract. It also says the resolver is by design "sticky": "the DNS resolver won't fail over and query another DNS server as long as the active DNS is responsive, even if the response from the DNS Server is 'I either don't host the record you're looking for or even host a copy of the zone for that record'."
Risk: changing the DNS server list on a DC changes how it resolves everything. Record the old list and keep a second valid server in place before you remove one. It also is not supported, per the page, to disable IPv6 by unchecking it in the network card properties.
Records missing on the destination's server. If the zones are Active Directory-integrated, check replication latency or failure, differing replication scopes, and conflict-mangled zones. If they are primary and secondary zones, check that zone transfers are allowed, that the secondary server is on the allowed list, and, as Microsoft lists, that a secondary on Windows Server 2008 is not empty because of KB953317. Check the forwarders and delegations between parent and child zones for invalid addresses. If a registered record later disappears, Microsoft points to duplicate zones in different replication scopes and overly aggressive scavenging.
Example (illustrative): dc01 in contoso.com logs 8524 for dc03, and repadmin /showrepl on dc01 lists dc03 with the DSA object GUID 0b3f6a52-1d44-4c0e-9a7b-5e2c81d4f001. dc03 was switched off and deleted from VMware last quarter, so there is no host to ask for its own GUID, and ping 0b3f6a52-1d44-4c0e-9a7b-5e2c81d4f001._msdcs.contoso.com fails because nothing registers that CNAME any longer. The administrator confirms with the server owner that dc03 is gone for good, records the GUID, deletes the dc03 NTDS Settings object in DSSITE.MSC while pointed at dc01, and runs repadmin /showrepl again. The 8524 line for dc03 no longer appears.
Confirm the fix
From the destination DC, ping the CNAME again and run nslookup -type=cname for it: both should succeed. Retry replication and run repadmin /showrepl and repadmin /replsum: the partition should show a new last success time. Run dcdiag /test:replications and dcdiag /test:dns again, and check that events 2087 and 2088 stop appearing in the Directory Service log.
What to watch afterwards
- Event 2087 and 2088 on every DC. Either means DNS is failing Active Directory again.
- After each DC promotion or rebuild, check the old NTDS Settings object is gone.
- DNS scavenging settings and zone replication scope for
_msdcs. - The DNS client list on every DC after a network change.
- Timing at startup: Microsoft notes that dynamic registration can be delayed during operating-system start.
Read next
Related articles you may want next.
- TroubleshootingAD replication error 1722 "The RPC server is unavailable": find the layer that is really failingActive Directory replication fails with 1722 (0x6ba). Prove whether name resolution, a blocked port, signing or the network is at fault, fix that layer and confirm replication has caught up.Read article
- TroubleshootingClean Up Stale AD DNS Records: Scavenging Without Deleting Live OnesStale DNS records in an AD-integrated zone? Understand no-refresh and refresh intervals and timestamps, list records by age first, then enable scavenging on one server safely.Read article
- TroubleshootingDNS event 4013 after a restart: why a domain controller takes 15 minutes or more to startA domain controller sits at Preparing network connections for up to 25 minutes and logs DNS event 4013. Find out why DNS and Active Directory are waiting on each other, prove it, then stagger restarts and set the DNS client order so a working DNS server is always reachable.Read article
Risks and limits
These commands have not been run or lab-tested. The page's examples come from the Windows Server 2008 R2 era and carry typing slips, such as the _mscs spelling in one note, so copy command patterns, not literal text. Some steps refer to Windows 2000 domains and to products no longer supported. Microsoft's page recommends collecting data with its TSS tool for Active Directory replication issues if you need support. Cleaning metadata, changing DNS settings and restarting Netlogon on production DCs are all changes to live authentication. Make one at a time, record the before state, and test after each.
Sources
- Active Directory Replication Error 8524: The DSA operation is unable to proceed because of a DNS lookup failure — Microsoft Learn, page dated 2026-02-12, accessed 18 November 2026
This article was originally published on .