About this article: This article is reviewed against the cited sources. This is source research, not lab validation. Check the stated versions and your own requirements before making changes.
When a Microsoft 365 mailbox fills, Exchange Online warns first, then stops sending, then stops receiving. Microsoft's limits page lists, for Business Basic and Standard, a warning at 98 GB, "Prohibit Send" at 99 GB and "Prohibit Send/Receive" at 100 GB. Once receiving stops, senders get a non-delivery report.
An owner has five choices. Each one trades cost, convenience and reversibility differently, and one of them, auto-expanding archiving, cannot be turned off once it is on. Each option below shows what Microsoft says it needs, and how to decide.
What the error means
Microsoft's limits page explains the three alerts. Warning: "The user receives an email warning that the mailbox is approaching the maximum size limit." Prohibit Send: the user "can't send new messages until enough email is deleted." Prohibit Send/Receive: "Exchange Online rejects any incoming mail when the mailbox size limit is reached, and sends a non-delivery report (NDR) to the sender."
Microsoft states that "the size of an Exchange Online mailbox is determined by the subscription license that's associated with it." The limits page lists user mailboxes at 100 GB for Microsoft 365 Business Basic, Standard and Premium and for E3 and E5, 50 GB for Office 365 E1, and 2 GB for F3. For the standalone Exchange Online Plan 1 it lists 50 GB and for Plan 2, 100 GB. These figures are from the page dated 2026-11-11. Check the current page before you decide, because Microsoft changes limits and licence names.
A mailbox has more than one quota. The archive mailbox and the Recoverable Items folder (where deleted items wait) have their own limits, and the mailbox can be "full" in either.
Likely causes
The "causes" here are the reasons a mailbox fills, because the right option depends on which applies.
| Cause | What you see | How to confirm |
|---|---|---|
| Normal growth reached the licence's mailbox limit | Warning email, then Prohibit Send | Mailbox statistics near the limit for the licence |
| Archive mailbox not enabled, or enabled but full | Primary fills while an archive has room, or the archive is itself near its quota | Archive status and archive size in mailbox properties |
| Recoverable Items folder full | Deletions stop freeing space; Microsoft's table lists 30 GB for the folder when the mailbox is not on hold and 100 GB when it is | Compare the mailbox statistics from the checks below with the Recoverable Items quotas on Microsoft's limits page; Microsoft's pages on this task give no Recoverable Items command |
| Shared mailbox at its limit | Microsoft: shared mailboxes hold up to 50 GB without a licence; at the limit "you can receive email for some time, but you can't send new email" | Size of the shared mailbox against 50 GB |
| Custom quota set lower than the licence allows | Warnings earlier than expected | Get-Mailbox quota values below the licence limit |
Prove the cause before changing anything
Read-only checks first.
- Find how full the mailbox is. Microsoft's cmdlet page example is
Get-MailboxStatistics -Identity AylaKol; addingFormat-Listshows every property it returns:
Get-MailboxStatistics -Identity ayla@contoso.com.au | Format-List
- Check the quotas attached to the mailbox. Microsoft's page for this task gives:
Get-Mailbox ayla@contoso.com.au | Select *quota*
If the quotas are lower than the licence limit, someone set a custom quota. That is a policy choice, not a licence problem.
- Check the archive and auto-expanding status. Microsoft gives these commands:
Get-OrganizationConfig | FL AutoExpandingArchiveEnabled
Get-Mailbox ayla@contoso.com.au | FL AutoExpandingArchiveEnabled
A value of True means the setting is on for the organisation or the mailbox.
- Ask what the mail is. Large attachments, a shared mailbox used as a file store and automated mail all fill a mailbox. Microsoft says a user's archive "is intended for just that user", and that copying mail from several people into one archive mailbox with journaling, transport rules or auto-forwarding rules "isn't permitted".
Fix
Choose by what the business needs.
| Option | What it does | Cost and limit | Can it be undone? |
|---|---|---|---|
| 1. Clean up and retention | Delete old mail. On its auto-expanding archiving page, for a case where the main archive also reaches its quota, Microsoft recommends retention policies that "delete items after a specified period" | No licence cost; staff time or a policy | Not once the mail is gone for good; keep a copy first |
| 2. Move older mail to the archive | Archive mailbox holds extra storage | Table lists archive mailboxes at 50 GB for Business Basic and Standard and 1.5 TB for Business Premium, E3 and E5, with a footnote on 100 GB initial storage | Microsoft's pages give no step for moving items back |
| 3. Change the licence | Microsoft: "you'll have to assign a different subscription license" | Licence cost; check the current price page | A licence can be reassigned, but see risks |
| 4. Auto-expanding archiving | Archive grows up to 1.5 TB | Must have archive enabled; PowerShell only; extra provisioning time | No. Microsoft: "it can't be turned off" |
| 5. Lower the quota | Warns sooner, protects other limits | No licence cost; users hit limits earlier | Yes, by resetting the values |
Option 1.
Save first: copy anything the business must keep before deleting it.
Disruptive step: the retention policies in this option delete items, and deleted mail may be impossible to recover once it is purged.
To undo it: there is no way back for items already purged, so rely only on the copy you saved.
Option 2. Microsoft says archiving a mailbox gives "up to 100 GB of additional storage" once enabled. Microsoft's command can enable archives for every user who does not have one.
Save first: run the Get-Mailbox part of the command below alone and keep the list. Risk: the whole command changes every user mailbox in the filter at once. Back-out: there is no documented way back; Microsoft's page does not give a disable command, so confirm the list from the Get-Mailbox part is exactly the mailboxes you intend before you run the whole command.
Get-Mailbox -Filter {ArchiveStatus -Eq "None" -AND RecipientTypeDetails -eq "UserMailbox"} | Enable-Mailbox -Archive
Microsoft's pages give 100 GB of additional storage here, while the limits table lists 50 GB archives for Business Basic and Standard; confirm your own plan's figure first.
Option 3. Microsoft's diagnostic in the admin center "will guide you through the process of assigning a different subscription license." Save first: note the user's current licence. Disruptive step: assigning the new licence changes the mailbox limit and may change other services. Back-out: reassign the old licence. Microsoft's page does not describe what happens when a mailbox that has grown past the old licence's limit is moved back to it, so do not treat this as a free trial.
Option 4. Microsoft's page lists the rules before you start: "After you turn on auto-expanding archiving for your organization or for a specific user, it can't be turned off." "Administrators can't adjust the storage quota for auto-expanding archiving." It "prevents you from recovering or restoring an inactive mailbox", and it must be run in Exchange Online PowerShell. This option is for one user whose archive is already enabled.
Select the right object first. Read this, and keep the output:
Get-Mailbox ayla@contoso.com.au | FL UserPrincipalName,ArchiveStatus,AutoExpandingArchiveEnabled
Run the next command only if the user principal name is the person you intend, ArchiveStatus shows the archive is enabled, and AutoExpandingArchiveEnabled is not already True. Microsoft's page also requires you to be a global administrator or a member of the Organization Management role group (or, for specific users, a role group that includes the Mail Recipients role). Ask whoever manages holds and retention policies whether the mailbox is on hold or under a retention policy, because Microsoft says that changes the quota. If any answer is unclear, stop and get the owner's written decision before going on.
Microsoft's page has a hybrid limit: "In an Exchange hybrid deployment, you can't use the Enable-Mailbox -AutoExpandingArchive command to enable auto-expanding archiving for a specific user whose primary mailbox is on-premises and whose archive mailbox is cloud-based." For that case the page names a different, organisation-wide command; read the page before choosing it.
Disruptive step: the command below cannot be undone, so there is no way back. Impact: permanent for that user's mailbox, with a growth limit of 1 GB per day and up to 30 days for extra storage. Microsoft says that on a mailbox on hold or under a retention policy, enabling it for a specific user adds 10 GB to the archive and the Recoverable Items quota (100 GB to 110 GB). For eligible E5 and similar licences, Microsoft announced a rise from 1.5 TB to 3 TB beginning mid-October 2026; check the current page.
Enable-Mailbox ayla@contoso.com.au -AutoExpandingArchive
Option 5. This option does not free any space. It lowers the quotas, so the user is warned or stopped sooner. Microsoft's example on its mailbox size page sets quotas of 19 GB, 20 GB and 18 GB for a mailbox licensed for 50 GB. Those are Microsoft's illustration values and must not be copied: on a mailbox that already holds more than the new values, sending and receiving stop at once and senders get non-delivery reports. For the 97 GB mailbox in the example below, a 20 GB limit would block it immediately.
Save first: the Select *quota* output, kept in a file.
Disruptive step: the command below lowers the quotas, so the user is warned and stopped sooner, and a value below current usage blocks the mailbox at once.
Use values above the mailbox's current size and below the licence limit shown in your saved output. The form is Microsoft's, with placeholders in place of values:
Set-Mailbox ayla@contoso.com.au -ProhibitSendQuota <Value> -ProhibitSendReceiveQuota <Value> -IssueWarningQuota <Value>
To undo it, run the same command with the saved quota values from the file, written as numbers with units (for example in GB) as in your listing.
Confirm the fix
Re-run the statistics and quota commands. The mailbox should sit below the warning level with room for the growth you expect. For an archive change, confirm the user sees the Archive in Outlook and that moved mail is readable. For option 4, confirm AutoExpandingArchiveEnabled is True and allow time for provisioning.
Example (illustrative): a Business Standard user at contoso.com.au has 97 GB used and grows 1.5 GB a month. The warning at 98 GB is 1 GB away, about 20 days (1 divided by 1.5, times 30). Prohibit Send at 99 GB is 2 GB away, about 40 days. Prohibit Send/Receive at 100 GB is 3 GB away, 2 months (3 divided by 1.5). The owner has time to choose between clean-up and an archive, but not to wait for the next quarter.
What to watch afterwards
- Set a monthly report of mailboxes above a threshold you choose, measured against the limit for their licence. Microsoft's limits table gives the number for each licence.
- Check shared mailboxes separately; they cap at 50 GB without a licence.
- Check Recoverable Items size on mailboxes placed on hold, since deleting mail does not free space there.
- Record which option was chosen for each person, so a leaver's mailbox is treated consistently.
Read next
Related articles you may want next.
- TroubleshootingExchange Online '554 5.2.2 mailbox full' when sending to a mail-enabled public folder554 5.2.2 mailbox full on a mail-enabled public folder? Check the folder, organisation and public folder mailbox quotas, then raise only the one reached.Read article
- Backup & RecoveryMicrosoft 365 Data: What Native Retention Restores, What It Does Not, and Graph API ThrottlingWhat Exchange Online, SharePoint, OneDrive and Teams can put back, for how long and by whom, and the Graph API limits on backup and restore time.Read article
- TroubleshootingCan't open a leaver's mailbox after removing their Microsoft 365 licence: the 30-day window and what to do firstMailbox gone after you removed a Microsoft 365 licence? You have 30 days to reassign one. Learn the hold case, shared mailbox and inactive mailbox options.Read article
Risks and limits
These commands have not been run or lab-tested. Limits and licence names are from Microsoft pages dated between 2025-06-25 and 2026-11-11; check the current pages before signing anything. Microsoft's tables show archive limits (50 GB for some plans, 1.5 TB for others) and the Purview page says an enabled archive gives up to 100 GB, so confirm your plan's figure before you commit.
Deleting mail to make room is permanent. Auto-expanding archiving cannot be turned off. Retention policies that delete items remove data other people may need. Auto-expanding archiving does not replace a copy of mail kept elsewhere.
Sources
- Exchange Online limits — Microsoft Learn, page dated 2026-11-11, accessed 20 November 2026
- Learn about auto-expanding archiving — Microsoft Learn, page dated 2026-10-14, accessed 20 November 2026
- Enable auto-expanding archiving — Microsoft Learn, page dated 2026-10-14, accessed 20 November 2026
- Increase or customize Exchange Online mailbox size — Microsoft Learn, page dated 2025-06-25, accessed 20 November 2026
- About shared mailboxes in Microsoft 365 — Microsoft Learn, page dated 2026-03-13, accessed 20 November 2026
- Get-MailboxStatistics — Microsoft Learn, date not shown, accessed 20 November 2026
This article was originally published on .